Hướng dẫn sử dụng dải LED linh hoạt

LED flexible strip can be used for home decoration lighting, commercial lighting and some special lighting. It has a wide range of applications and is one of the most concerned and popular decoration and lighting products more and more.

Since the LED flexible strip is a new type of environmentally friendly decorative lighting product, many people do not fully grasp its use method, and improper use will cause certain damage to the product. Therefore, SignliteLED is here to explain the installation and use of LED flexible strips.

The instructions for using the LED flexible strip are as follows:

1. The power supply voltage should be consistent with the label on the LED flexible strip, and an appropriate safety device should be installed.

2. When the lamp body is damaged, please cut off this part immediately and do not continue to use it to avoid danger.

3. During use, please do not wrap or cover the LED flexible strip with any objects.

4. For flashing, gradient and other effects, you can use the LED controller.

5. The installation is fixed, do not use metal materials such as iron wire to tie the light tube tightly, to prevent the iron wire from getting caught in the LED flexible strip, causing short circuit or burning.

6. The interface must be firm and there is no hidden danger of short circuit. When installing outdoors, each interface must be sealed with glass glue to ensure that no water enters the interface.

7. Only two sections of LED flexible light strips with the same specification and voltage can be connected in series, and the total length cannot exceed the maximum usable length.

8. To install the LED strip in cold weather, you can turn on the power for a few minutes to make the light body soft and easy to bend, and then turn off the power to install.

9. Do not turn on the power supply during the installation or assembly of the light strip. Only when it is connected, installed and correct can it be turned on.

10. Although the LED flexible strip can be cut at will, it can only be cut at the place where the scissors mark is printed on the light strip.

The popularity rate of LED flexible strips is getting higher and higher, and the scope of use is becoming wider and wider. After users purchase, only by installing and maintaining them in the correct way can they ensure their use efficiency and bring energy saving to decoration and lighting in various places.