How to Wire Various LED Strip Lights?

Because of the variable color of LED Strip, dimmable, can control the color change, it is often used in the decorative role of home improvement.At resent, the types of LED light strips on the market are generally: monochromatic led strips, two-color temperature led strips, RGB led strips…Let’s talk about how these lights are wired and operated.

I.How to Wire Single Color LED Strip Lights?

1.The LED lamp is connected to the power supply in parallel to prevent uneven lighting caused by voltage drop :

2. both ends of the power supply, add two power lines, reduce the voltage drop

3.Multiple lamp belts are connected in series, and the power supply needs to be increased according to the length, usually a power supply with a length of 10 meters to prevent the brightness of the light from dimming

Please note that the power of the total LED strip lights should not exceed 80% of the power supply power, which is the principle of 80% of the power supply power

II .How to wire CCT tunnable strip?

also called CCT adjustable LED strip light, usually has three wires and two different color temperature LEDs. You can adjust the brightness of these two different CCT LEDs to change the mixed CCT.

PWM dimming mode：The constant voltage power supply is connected to the power supply input of the color temperature controller, and the output end of the controller is connected to the three-wire color temperature lamp strip. Remote control can control the change of light brightness and color temperature.

The following figure is the connection mode of color temperature， Only a tunable white LED controller is required for a small number of adjustable color temperature LED strips. If the number is large, then a PWM amplifier is needed.

ITEM	พีarameter
voltage（v）	12-24v
Power（w）	120W（6A*2ch）
Net（g）	43
remote control distance	20-30m
Remote control frequency	2.4G

86 Panel semi-circle touch color temperature control：Constant voltage power supply to the control panel, the control panel is connected to the light belt, by touching the switch, you can adjust the light and color temperature.

ITEM	พีarameter
voltage（v）	12-24v
Power（w）	192W（4A*2ch）
Net（g）	128
Size（mm）	86*86*36
Dimming mode	Tempered glass, infinite touch dimming

III. How to Wire RGB LED Strip Lights?

The difference between RGB and RGBW, RGBIC, RGBCCT and RGBCCTIC LED lights：

แถบ LED RGB indicates a 3-in-1 chip of red, green, and blue color. Such strips can form a wide range (16 million) of shades by mixing red, green, and blue. An RGB LED strip can also produce a white hue. But the white by these strips is not pure white

RGBW LED Strip contain a 4-in-1 chip with red, green, blue, and white LEDs. So, besides the million hues produced with RGB, RGBW adds more combinations with the extra white diode.

RGBIC LED Strip combines a 3-in-1 RGB LED plus a built-independent chip. In the case of color variety, these LED Strips are the same as RGB and RGBW. But the difference is that RGBIC can bring multiple colors in a single strip at a time. Thus, it gives a flowing rainbow effect. But, RGB and RGBW cannot provide this multi-color option.

RGBCCT LED Strip CCT indicates Correlated Color Temperature. It allows CW (cold white) to WW(warm white) color-adjustable options. That is, RGBCCT is a 5-in-1 chip LED, where there are three diodes of RGB along with two diodes for white (cold and warm white)

RGBCCTIC LED StripCCT stands for correlated color temperature. It allows CW(cold white) to WW(warm white) color adjustable options. In other words, the RGBCCT is a 5-in-1 chip LED with three RGB diodes and two white diodes (cold white and warm white). IC refers to the chip with added control, which can be programmed to control color

Wiring RGB LED Strip Lights With LED Controllers

For RGB, RGBW, RGBIC, RGBCCT connection, Signlite company has a complete solution，Customers can choose different controllers according to their needs

1.RGB controller and remote control connection diagram：

A single remote control can be matched with multiple receivers, and each receiver can be controlled separately and all receivers can be controlled simultaneously。

2. Wire SPI Addressable LED Strip Lights：

This magic controller is suit for UCS2811(LPD6803/LPD8806,WS2811/TM2801/TM1809 etc) output applications to drive LED directly. It is widely used in advertising, stage sets, home decorations, etc. It has many advantages such as low price, easy connection and simplicity to use. It has power off memory function. Meanwhile, you could adjust brightness, static color choices and various dynamic changes in lighting effects through wireless remote control.

3.Wire DMX512 Addressable RGB LED Strip Lights：

This DMX decoder adopts advanced computer control chip,can receive the international DMX – 512 standard digital control signals and converted into PWM controller signal to drive the LED.It can be controlled by the DMX Console,and can connected with numbers of DMX Decoder to increase the output power to realize all kinds of changing mode.Besides, this DMX decoder can be used as the synchronous controller to controlled the LED alone,it can realize the synchronous effects.This decoder adopt the digital tube to show the address code,and with 3 buttons to setting,make it more easy to used.

we can use the 3-channel or 4-channel output DMX512 decoder to control the adjustable color temperature LED strip.